GE JGRP20 User Manual

Page of 36
29
Operating Instructions
Safety Instructions
Consumer Support
Tr
oubleshooting T
ips
Before you call for service…
ge.com
Troubleshooting Tips 
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem
Possible Causes
What To Do
Oven will not work
Circuit breaker has been
• Reset circuit breaker or replace fuse.
tripped or a fuse has blown.
Oven control not properly set.
• Set the control according to this manual.
Control signals after
You forgot to enter a bake 
• Touch the BAKE pad and desired temperature or
entering cooking time
temperature or cleaning time.
the SELF CLEAN pad and desired clean time.
or start time
Food does not bake
Oven controls improperly set.
• See the Baking or Roasting section.
or roast properly
Shelf position is incorrect.
• See the Baking section.
Oven thermostat needs 
• See the Adjust the oven thermostat—Do it yourself!
adjustment.
section.
Clock not set correctly when
• See the Using the clock and timer section.
timed cooking.
Aluminum foil used improperly
• See the Baking or Roasting section.
in the oven.
Oven bottom not securely
• See the Care and cleaning of the oven section.
seated in position.
Food does not
Oven controls improperly set.
• Make sure you touch the BROIL HI/LO pad. 
broil properly
Oven door not closed.
• See the Broiling section.
Improper shelf position
• See the Broiling Guide.
being used.
Food being cooked in a hot pan.
• For best results, use a pan designed for broiling.
Make sure it is cool.
Cookware not suited for broiling.
• For best results, use a pan designed for broiling.
Oven bottom not securely
• See the Care and cleaning section.
seated in position.
Oven temperature too
Oven thermostat 
• See the Adjust the oven thermostat—Do it yourself! 
hot or too cold
needs adjustment.
section.
Clock and timer
A fuse in your home may be 
• Replace the fuse or reset the circuit breaker.
do not work
blown or the circuit breaker
tripped.
Oven controls improperly set.
• See the Using the clock and timer section.