Fisher & Paykel BI601/451 User Manual

Page of 4
INSTALLATION INFORMATION FOR QUANTUM BI601/451 SERIES BUILT-IN OVENS  
Read the instructions before installing or using this 
product.
Please make this information available to the person 
responsible for installing this oven as soon as possible, 
it could reduce your installation cost.
In order to avoid a hazard these products must be installed 
according to these instructions for installation. 
Please follow installation information carefully. If in doubt 
consult your local building authority by-laws.
Failure to install the appliance correctly could invalidate any 
warranty or liability claims and lead to prosecution. 
The product is to be installed only by an authorised 
person.
DO      Ensure a suitable disconnection switch is 
incorporated in the permanent wiring, positioned to comply 
with the Local Wiring Rules and Regulations.
DO      Ensure that the location of the oven connection 
socket is outside the installation space if the appliance is 
flush to the rear wall.
DO      Ensure the benchtop and the oven cavity are square 
and level.
DO      Ensure the electrician allows at least 1.5m free 
length of connection cable within the cavity for ease of 
installation and service of the oven.
DO      Ensure that the interconnection cord between the 
cooktop and the oven or control box is not accessible 
via cupboard doors after installation. This applies to any 
extension cord as well, even though they are double 
insulated.
DO      Use easy to clean finishes for the wall surfaces 
surrounding the oven and cooktop to aid removal of any 
cooking fume staining resulting from the use of the oven 
and cooktop.
DO      Check the height from the floor suits the user.
DO      Ensure that drawers and doors will be clear of 
obstruction when fully opened.
The cavity must be a completely sealed box with no gaps. 
This will ensure the cooling air flows under the product 
to give the correct venting and cooling for the oven and 
cabinet surround.
Take care of sharp edges when handling products.
IMPORTANT INFORMATION
CAUTION
WARNINGS
Part No. 541001 QBI601/451 NZ ERC E  September 2001
BEFORE YOU START