Pioneer DJM-800 User Manual

5

<DRB1394>

En

Connect a DJ CD player’s audio output connectors to one of the
channel 1 to 2 CD input connectors or the channel 3 to 4 LINE input
connectors, and connect the player’s control cable to the
corresponding channel’s CONTROL connector.
Set the connected channel’s  DIGITAL/CD  switch or DIGITAL/LINE
switch to either [CD] or [LINE], and set the input selector switch to
[CD/DIGITAL] or [LINE/DIGITAL].
When making digital connections, connect the digital coaxial output
terminal of the DJ CD player to one of the channel 1 to 4 DIGITAL IN
connectors of the DJM-800; then set the corresponding channel’s
DIGITAL/CD  switch or DIGITAL/LINE  switch to [DIGITAL], and the
input selector switch to [CD/DIGITAL] or [LINE/DIGITAL].

To connect an analog turntable, connect the turntable’s audio
output cable to one of the channel 2 to 4 PHONO input connectors.
Set the corresponding channel’s input selector switch to [PHONO].
The DJM-800’s PHONO inputs support MM cartridges.
Connect the turntable’s ground wire to one of the DJM-800’s
SIGNAL GND terminals.
÷ Note that no PHONO input connector is provided for channel 1.

To use a cassette deck or other CD player, connect the component’s
audio output connectors to one of the channel 3 to 4 LINE  input
connectors. Then set the corresponding channel’s  DIGITAL/LINE
switch to [LINE], and the input selector switch to [LINE/DIGITAL].
Alternately, connect the component to the channel 1 LINE  input
connector, then set the channel 1 input selector switch to [LINE].

To use a CD player or other component with digital connections,
connect the component’s digital coaxial output connectors to one of
the channel 1 to 4 DIGITAL IN connectors; then set the corresponding
channel’s DIGITAL/CD switch or DIGITAL/LINE switch to [DIGITAL],
and the input selector switch to [CD/DIGITAL] or [LINE/DIGITAL].