Hoshizaki KM-201BAH User Manual

53

Remove Expansion 
Valve Cover fi rst

Cut ties to make Bulb 
removable

Bulb Insulation Hose

Expansion Valve

Bulb

1. Always install a new drier every time the sealed refrigeration system is 

opened.

2. Do not replace the drier until after all other repair or replacement has 

been made. Install the new drier with the arrow on the drier in the 
direction of the refrigerant fl ow.

3. When brazing, protect the drier by using a wet cloth to prevent the drier 

from overheating. Do not allow the drier to exceed 250°F (121°C).

1) Unplug the icemaker or disconnect the power source.

2) Remove the panels.

3) Recover the refrigerant and store it in an approved container.

4) Disconnect the condenser inlet and outlet piping.

5) Remove the fan motor bracket from the condenser.

6) Remove the screws securing the condenser assembly, then remove the assembly.