Hoshizaki KM-201BAH User Manual

65

1) Unplug the icemaker or disconnect the power source.

2) Remove the louver.

3) Remove the two mounting screws, and pull the control box toward you.

4) Refi t the removed parts in the reverse order of the removal procedure.

Note: After replacing the components inside the control box, connect and tie the wires 

properly in their correct position. Especially make sure that the harness does not 
press the push buttons on the control board.

Screw

Control Box

Power Relay

Transformer

Control Board

Power Switch

Fuse
Fuse Holder

Pull toward you