Hoshizaki KML-700MWH-M User Manual

17

1) Dilute 1.5 fl. oz. (37 ml or .5 tbs) of a 5.5% sodium hypochlorite solution (chlorine 

bleach) with .5 gal. (9.5 l) of warm water.

) Remove the front insulation panel.
3) Pour the sanitizing solution into the water tank.
4) Move the service switch to the "WASH" position.
5) Replace the front insulation panel and the front panel in their correct positions.
6) Turn on the power supply to start the sanitizing process.
7) Turn off the power supply after 15 minutes.
8) Remove the front panel.
9) Move the service switch to the "DRAIN" position.

10) Replace the front panel in its correct position, then turn on the power supply for 

 minutes.

11) Turn off the power supply.
1) Remove the front panel.
13) Repeat steps 18 through 31 in "1. Cleaning Procedure" two times to rinse thoroughly.
14) Move the control switch to the "ICE" position.
15) Replace the front panel in its correct position.
16) Clean the dispenser unit/storage bin liner using a neutral cleaner. Rinse thoroughly 

after cleaning.

17) Turn on the power supply to start the automatic icemaking process.

This icemaker must be maintained individually, referring to the instruction manual and 
labels provided with the icemaker.

1. Only qualified service technicians should attempt to service or maintain this 

icemaker.

. Disconnect power before performing service or maintenance.

To prevent corrosion, wipe the exterior occasionally with a clean, soft cloth. Use a damp 
cloth containing a neutral cleaner to wipe off oil or dirt buildup.

• Wash your hands before removing ice. Use the plastic scoop provided (bin accessory).
• The dispenser unit/storage bin is for ice use only. Do not store anything else in the 

dispenser unit/storage bin.

• Clean the scoop and the dispenser unit/storage bin liner using a neutral cleaner. Rinse 

thoroughly after cleaning.