Hoshizaki KM-1800SAH/3 User Manual

16

g. Put aside the "Z" bracket; it is not needed with the 

bins listed above.

h. Remove the two screws from the lower part of the 

thermostat bracket (plastic) and use them to attach 
the thermostat extension bracket (stainless) to the 
thermostat bracket (plastic).

Thermostat Bracket 
(plastic)

Thermostat Extension 
Bracket (stainless)

g. Remove the two screws securing the thermostat 

bulb attachment (plastic) to the thermostat extension 
bracket (stainless). Use the two screws to attach 
the "Z" bracket (plastic) to the thermostat extension 
bracket (stainless).

h. Use the two 4×10 stainless steel screws in the 

accessory bag to attach the thermostat bulb 
attachment (with attached thermostat bulb) to the "Z" 
bracket.

i. Remove the two screws from the lower part of the 

thermostat bracket (plastic) and use them to attach 
the thermostat extension bracket (stainless) to the 
thermostat bracket (plastic).

6) Level the icemaker/storage bin in both the left-to-right and front-to-rear directions. Adjust 

the ice bin legs to make the icemaker level.

7) Place the panels and baffle in position (unless you are installing a second unit). (See "E. 

Installation of Second Unit.")

1) See "D. Setup" for the lower unit installation.
) Remove the top panel and the top insulation of the lower 

unit. The top panel and the top insulation of the lower unit 
are not required when installing the second icemaker.

3) Unpack the second icemaker (upper unit), and remove all 

shipping cartons, tape and packing.

4) Remove the panels of the second icemaker.
5) Stack the upper unit on top of the lower unit.
6) Secure the upper unit to the lower unit by using the two 

universal braces and the four bolts provided.

Thermostat Bracket 
(plastic)

Thermostat Bulb 
Attachment (plastic)

"Z" Bracket (plastic)

Thermostat Extension 
Bracket (stainless)

Universal 
Brace

Bolt

Bin

Icemaker
(Upper 
Unit)

Icemaker
(Lower 
Unit)