Troy-Bilt TB180b User Manual
ENGLISH
9
Operating the
Blower
Blower
The on/off toggle switch has two
settings; off and on. The rear switch
position, marked “I”, is on. The forward
switch position, marked “O”, is off.
(See Figure 6)
settings; off and on. The rear switch
position, marked “I”, is on. The forward
switch position, marked “O”, is off.
(See Figure 6)
Blower Operation
Figure 6 - On/Off switch positions
Figure 7- Holding blower for blower operation
WARNING: The blower
can throw debris, causing
injury to those nearby.
• Do not blow nails, bolts,
injury to those nearby.
• Do not blow nails, bolts,
rocks, or other hard ob-
jects.
jects.
• Do not operate blower near
bystanders or pets.
• Be careful when blowing
debris from stairs, cor-
ners, or other tight areas.
Objects can be blown back
toward operator.
ners, or other tight areas.
Objects can be blown back
toward operator.
• Wear approved eye pro-
tection, long pants, and
shoes while operating this
blower.
shoes while operating this
blower.
Properly assemble the blower for
blower operation (see page 7,
blower operation (see page 7,
Assem-
bling Blower). Follow the steps below
to operate the blower.
1. Hold blower using the handle on
to operate the blower.
1. Hold blower using the handle on
housing. (See Figure 6)
2. When ready to start the blower,
toggle the on/off switch to the “I”
setting.
setting.
3. To stop the blower, toggle the on/
off switch to the off “O” setting.