Manitowoc Ice SY1474C User Manual

 

MODEL - SY0684C or SD0672C 
MODELS - SY1474C or SD1472C 
1.  Place the panel on a flat, horizontal surface with the 

stainless steel side (exterior) facing up. 

Note:

 The screw hole on the face of the panel should be in the 

lower right-hand corner when you are facing the panel, as 
pictured below: 
 
2.  Make sure the white PVC film is removed from the front 

panel. 

3.  Use the Alcohol Prep Pad found in the kit to gently clean 

surface of stainless steel panel, focusing on the central 
area highlighted below. 

 

              

 

 
4.  Find the large L-shaped template in the kit.  Remove the 

plastic static cling from the paper backing. 

5.  Carefully place the L-shaped static cling template in the 

lower left-hand corner of the panel as shown in the 
illustration below: 

Note:

 Verify template rests on the top edge of the bottom 

molding and is aligned with left edge of the panel. 

 

Models SY1474, SD1472 

 

 

6.  Examine the urethane logo.  Notice that it is covered on one 

side by white backing paper and on the other by a thinner semi-
transparent masking film.  Peel back the solid, white backing 
paper slowly, making sure the urethane logo remains attached 
to the thinner semi-transparent masking film.  This must be 
done very carefully, as the logo has a tendency to remain 
attached to the solid white backing paper, and the logo 
itself could be divided into several pieces. 

 

Verify the entire logo remains attached to the semi-transparent film 
as you peel it back

 

7.  Carefully place the semi-transparent film and logo within the 

inside edges of the template, making sure the edges of the 
film are flush with the inside edges of the template, as 
illustrated below. 

 

Note: Be sure that the logo is aligned properly.  It is difficult to re-
adjust the logo once the adhesive makes contact with the stainless 
steel. 

 

 

 
 

Manitowoc Ice, Inc. 

2110 South 26

th

 Street, P.O. Box 1720, Manitowoc, WI  54221-1720 USA                                                                                       000002851            

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879                           

Rev 01 

Web Site - www.manitowocice.com                                                                                                                                                    5/25/10 

White paper 

Semi-transparent film 

Logo