Panasonic DIGITAL CAMCORDER SDR-H40EG-S SDR-H40EG-S User Manual

Product codes
SDR-H40EG-S
Page of 116
27
LSQT1348
Setup
3
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time.
¬Rotate the mode dial to select 
 or 
.
1
Select the menu. (24)
2
Select the date or time, then 
adjust the desired value with the 
joystick.
≥ The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥ The 24-hour system is used to display the time.
3
Press the joystick to enter the 
selection.
≥ The clock function starts at [00] seconds when 
the joystick is pressed.
4
Press the MENU button to finish 
the setting.
≥ Check the date and time displayed.
∫ Changing the date and time display mode
Select the menu. (
24)
[SETUP] 
# [DATE/TIME] # desired display 
style
∫ Changing the date format
Select the menu. (
24)
[SETUP] 
# [DATE FORMAT] # desired 
display style
≥ The date and time function is driven by a built-
in lithium battery.
≥ If the time display is [- -], the built-in lithium 
battery needs to be charged. Use the following 
steps to charge the battery, and then set the 
date and time.
To recharge the built-in lithium battery
Connect the AC adaptor or insert the battery to 
the unit, and the built-in lithium battery will be 
recharged. Leave the unit as it is for approx. 
24 hours and the battery will save the date and 
time for approx. 6 months. (Even if the mode 
dial is set to OFF, the battery is still being 
recharged.)
[BASIC] 
# [CLOCK SET] # [YES]
[DATE]
[D/T]
[OFF]
15.11.2008
15.11.2008  12:34
Display style
Screen display
[Y/M/D]
2008.11.15
[M/D/Y]
11.15.2008
[D/M/Y]
15.11.2008
WARNING
THE LITHIUM BATTERY IN THIS 
EQUIPMENT MUST ONLY BE REPLACED 
BY QUALIFIED PERSONNEL. WHEN 
NECESSARY, CONTACT YOUR LOCAL 
PANASONIC SUPPLIER.
SDR-H60&50&40EB-LSQT1348_mst.book  27 ページ  2008年2月25日 月曜日 午前11時52分