Schumacher SC-300A Leaflet

Page of 2
For SpeedCharge
 Model SC-300A 
Battery Charger/Maintainer
 
SAFETY FIRST!
   
For Safety Warnings, refer to Owner’s Manual
Note:  A marine (boat) battery installed in a boat  
must be removed and charged on shore.
Steps To Take Before Using Your Battery Charger 
See pages 3 & 4 of the Owner’s Manual for all cautionary warnings.
1.  Charger requires 3-prong grounded 120V AC electrical outlet. 
2.  Keep hands, hair, clothing and jewelry clear of fan blades, belts, 
pulley and other engine parts.
3.  Keep the power cord and output cords away from the hood, door 
and/or moving engine parts.
4.  Wear safety glasses.
5.  Charge battery in a well-ventilated area.
Getting Your Battery Ready for Charging 
1.  If necessary, clean the battery terminals as well as possible. Wear 
rubber gloves and safety glasses to avoid contact with battery 
acid. 
2.  For batteries with removable vent caps, see page 5 of Owner’s 
Manual for more details. 
Connecting Your Battery Charger
1.  Attach RED clamp to positive (+) 
battery terminal. Refer to picture. 
(Negative Ground System)
2.  Attach BLACK clamp to negative 
(-) ground on an unpainted frame 
part or engine block of vehicle.
3.  Then, plug charger into a 120V AC 
electrical  outlet.  Simply  reverse 
the steps to disconnect.
OveR
BATTERY CHARGING
QUICK STEPS
00-99-000638/0306