Toshiba e-Studio 165/205 User Manual

154    Printing from Windows

This equipment supports printing from Windows applications using the PCL6 and PS3 printer 
drivers.
These printer drivers allow you to define such document properties as the orientation and print 
quality of your pages, and such complex finishing options as booklet layout and N-up printing.

Before printing, you have to configure the following options:

y

Configuration Settings
You have to configure such options as the Paper Feed Unit or the Paper Feed Pedestal. The 
features of these options are not available unless you tell the system that they are installed.

y

Department Code
This system can manage jobs by department code. This feature lets you manage job 
counters for every department code. For example, a network administrator can check the 
number of copies printed from specific department member.
If the Department Code is enabled, enter your Department Code provided by your adminis-
trator.

After you complete the installation of the printer drivers, you should configure the option settings 
on the printer drivers.
There are two methods to configure the options;

y

If this equipment and your computer are not connected in the TCP/IP network, you can con-
figure the options manually.

y

If this equipment and your computer are connected in the TCP/IP network, you can configure 
the options automatically obtaining the settings using the SNMP Communication.