ZyXEL Communications Vantage Access User Manual
Chapter 14 LAN Device
Vantage Access User’s Guide
164
BasicDataTransmit
Rates
Rates
This field displays the wireless transmission rate (Mbps) for broadcast, multicast
and unicast frames on the device.
Multiple transmission rates are separated by commas (,). For example, “1,2”
means the device is able to send at 1 Mbps or 2 Mbps.
and unicast frames on the device.
Multiple transmission rates are separated by commas (,). For example, “1,2”
means the device is able to send at 1 Mbps or 2 Mbps.
OperationalDataTr
ansmitRates
ansmitRates
This field displays the maximum transmission rate (in Mbps) allowed for unicast
frames on the device.
Multiple transmission rates are separated by commas (,). For example, if the
BasicDataTransmitRates field is “1,2” and this field is “1,2,5.5,11”, then the
device can transmit unicast frames at the maximum rates of 5.5 Mbps or 11
Mbps.
frames on the device.
Multiple transmission rates are separated by commas (,). For example, if the
BasicDataTransmitRates field is “1,2” and this field is “1,2,5.5,11”, then the
device can transmit unicast frames at the maximum rates of 5.5 Mbps or 11
Mbps.
PossibleDataTrans
mitRates
mitRates
This field displays the transmission rates for unicast frames WLAN clients are
allowed when connecting to the device.
For example, if this field displays “1,2,5.5”. This means that the device allows a
wireless connection of up to 5.5 Mbps even though it is capable of connecting at
11 Mbps.
allowed when connecting to the device.
For example, if this field displays “1,2,5.5”. This means that the device allows a
wireless connection of up to 5.5 Mbps even though it is capable of connecting at
11 Mbps.
InsecureOOBAcce
ssEnabled
ssEnabled
This field displays 1 to indicate that configuration changes are to be sent through
insecure management methods other than the WAN CPE Management Protocol.
0 disables this feature.
insecure management methods other than the WAN CPE Management Protocol.
0 disables this feature.
BeaconAdvertisem
entEnabled
entEnabled
This field displays 1 to indicate that the device is set to send beacons to advertise
its presence; otherwise, this field is 0.
its presence; otherwise, this field is 0.
RadioEnabled
This field display 1 to indicate that the wireless transmission is allowed on the
device; otherwise, this field displays 0.
device; otherwise, this field displays 0.
AutoRateFallBack
Enabled
Enabled
This field displays 1 to indicate that the device is set to automatically reduce
wireless transmission rate due to noise or contention.
0 deactivates this feature.
wireless transmission rate due to noise or contention.
0 deactivates this feature.
LocationDescriptio
n
n
This field displays the location of the device for identification purposes.
RegulatoryDomain
This field displays the name of the regulatory body in your geographical area.
The first two characters are the country code as defined in ISO/IEC 3166-1. For
the third character, “ “ means all environment, “I” means inside and “O” means
outside.
The first two characters are the country code as defined in ISO/IEC 3166-1. For
the third character, “ “ means all environment, “I” means inside and “O” means
outside.
TotalPSKFailures
This field is applicable for WPA and 802.11i authentication methods.
This field displays the number of times pre-shared key authentication has failed.
This field displays the number of times pre-shared key authentication has failed.
TotalIntegrityFailur
es
es
This field is applicable for WPA and 802.11i authentication methods.
This field displays the number of times MICHEAL integrity check has failed.
This field displays the number of times MICHEAL integrity check has failed.
ChannelsInUse
This field displays the channel number(s) that is currently used on the device for
wireless transmission.
wireless transmission.
DeviceOperationM
ode
ode
This field displays the wireless operation mode for the device.
DistanceFromRoot
This field displays the number of hops between this device and the wireless
bridge/repeater.
bridge/repeater.
PeerBSSID
This field displays the MAC address of the peer wireless bridge/repeater.
AuthenticationServ
iceMode
iceMode
If user authentication is enabled, this field displays the location of the user
database the device is to check.
database the device is to check.
TotalBytesSent
This field displays the number of transmitted bytes on this interface.
TotalBytesReceive
d
d
This field displays the number of received bytes on this interface.
TotalPacketsSent
This field displays the number of transmitted packets on this interface.
Table 43 TR-069: LAN Device: WLANConfiguration (continued)
PARAMETER
NAME
NAME
VALUE