ZyXEL Communications Vantage Access User Manual

Chapter 16 General Device Setup

Vantage Access User’s Guide

Figure 162   TR-098: LANConfigSecurity 

Use the IPPingDiagnostics screen to configure the ping test settings on a device. 

Select a registered device in the Device List window and click Provision > Data Model > 
InternetGatewayDevice > IPPingDiagnostics.

Figure 163   TR-098: IPPingDiagnostics 

The following table describes the labels in this screen. Refer to 

 for 

other field descriptions.  

Table 85   TR-098: IPPingDiagnostics  

DiagnosticsState

This field displays the ping test result. 

Interface

This field displays the hierarchical name of the interface for ping diagnostics. 
For example, 
“InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPCo
nnection.1”.
You can enter up to 256 characters for the interface name. 

Host

This field displays the IP address or domain name of the host the device is to 
ping to test the connection. 

NumberOfRepetition
s

This field displays the number of ping test before displaying the result. 

Timeout

This field displays the timeout (in milli-seconds) for a ping test. 

DataBlockSize

This field displays the size of the packet to send for each ping test. 

DSCP

This field displays the DiffServ Code Point (DSCP) to use for the test packets. 
The default is 0.