ZyXEL Communications Vantage Access User Manual
Chapter 18 WAN Device
Vantage Access User’s Guide
250
Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > WANDevice. Click a number and WANDSLInterfaceConfig to
display the screen.
InternetGatewayDevice > WANDevice. Click a number and WANDSLInterfaceConfig to
display the screen.
Figure 191 TR-098: WAN Device: WANDSLInterfaceConfig
The following table describes the labels in this screen. Refer to
for
other field descriptions.
Table 99 TR-098: WAN Device: WANDSLInterfaceConfig
PARAMETER NAME
VALUE
Enable
This field displays 1 to indicate that the link is active; otherwise, it displays
0.
0.
Status
This field displays the link status.
ModulationType
This field displays the modulation method used on the link.
LineEncoding
This field displays the line encoding method used to establish a connection
to the ISP.
to the ISP.
DataPath
This field displays whether the link uses fast (lower latency) or interleave
(lower error rate) data path.
(lower error rate) data path.
InterleaveDepth
This field is applicable when the DataPath field shows Interleave.
This field displays the interleaved depth.
This field displays the interleaved depth.
LineNumber
This field displays the number of the line pair used for the connection. For
example, 1 means the inner most pair.
example, 1 means the inner most pair.