ZyXEL Communications Vantage Access User Manual
Chapter 22 Voice Service
Vantage Access User’s Guide
374
22.9.3 Voice Profile RTP Redundancy Setup
Use the Redundancy screen to configure RTP payload redundancy.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > VoiceService.
2 Click a number and VoiceProfile.
3 Click a number and RTP.
4 Click Redundancy to display the configuration screen.
3 Click a number and RTP.
4 Click Redundancy to display the configuration screen.
Figure 323 TR-104: VoiceService: VoiceProfile: RTP: Redundancy
The following table describes the fields in this screen. Refer to
for
other field descriptions.
22.10 Voice Profile Numbering Plan
Use the NumberingPlan screen to configure the numbering plan for this voice profile.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > VoiceService.
2 Click a number and VoiceProfile.
3 Click a number and NumberingPlan to display the configuration screen.
3 Click a number and NumberingPlan to display the configuration screen.
Table 180 TR-104: VoiceService: VoiceProfile: RTP: Redundancy
PARAMETER NAME
VALUE
Enable
This field displays whether RTP payload redundancy is enabled or disabled.
PayloadType
This field displays the RTP payload type.
BlockPayloadType
This field displays the block payload type of the RTP redundancy packet.
FaxAndModemRedun
dancy
dancy
This field displays the redundancy number for fax data passthrough.
ModemRedundancy
This field displays the redundancy number for modem data passthrough.
DTMFRedundancy
This field displays the redundancy number for DTMF transmission.
VoiceRedundancy
This field displays the redundancy number for voice transmission.
MaxSessionsUsingRe
dundancy
dundancy
This field displays the maximum number of sessions with RTP redundancy for
this voice profile.
this voice profile.