ZyXEL Communications Vantage Access User Manual
Chapter 24 General Device Setup
Vantage Access User’s Guide
475
Figure 466 TR-106: Device: Info
The following table describes the labels in this screen. Refer to
for
other field descriptions.
Table 280 TR-106: Device: Info
PARAMETER
NAME
NAME
VALUE
Manufacturer
This is the name of the company that produced this device.
ManufacturerOUI
This field displays the six-hexadecimal-digit OUI (Organization Unit Identifier) of
the company. The OUI is a unique number assigned by the IANA. Devices
produced by the same company have the same hard-wired OUI.
the company. The OUI is a unique number assigned by the IANA. Devices
produced by the same company have the same hard-wired OUI.
ModelName
This field displays the device model name.
Description
This field displays additional information about the device.
ProductClass
This field identifies the product or class over which the SerialNumber parameter
is unique.
is unique.
SerialNumber
This field displays the device serial number.
HardwareVersion
This field displays the hardware model name.
SoftwareVersion
This field displays the firmware version number.
EnabledOptions
This field displays the name of the options enabled on the device.
AdditionalHardwa
reVersion
reVersion
This field displays the available information about the additional hardware version.
AdditionalSoftwar
eVersion
eVersion
This field displays the available information about the additional software version.
ProvisioningCode
The provisioning code is used by the service provider to identify specific
parameter settings for the device.
Enter the identifier of the DSL service provider or provisioning information. You
can enter up to 64 characters (use only A-Z, 0-9 and “.” with no spaces allowed).
parameter settings for the device.
Enter the identifier of the DSL service provider or provisioning information. You
can enter up to 64 characters (use only A-Z, 0-9 and “.” with no spaces allowed).
DeviceStatus
This field displays the current operational status of the device. The device’s status
may be "Up", "Initializing", "Error", or "Disabled".
may be "Up", "Initializing", "Error", or "Disabled".
UpTime
This field displays the time (in seconds) since the device was last restarted.