Henny Penny BW-4/3 Leaflet

  

 

 

 

Due to the lower temperature settings, this unit has been de

 

 

signed to hold NON-POTENTIALLY HAZARDOUS FOOD 

 

 

ONLY.  This unit will NOT hold potentially hazardous food at 

 

 

a safe temperature

 

 

1.  Turn power switch to the ON position.

 

 

2.  After a sequence of codes the display shows the time  

 

 

 

 

of day, or “ON”.

 

 

 

 

 

 

 

 

 

Press and hold the TEMP button to view the actual 

 

     temperature 

of 

the 

unit.

         

1.   Press and hold the TEMP button for 6 seconds.  The actual   

  

 temperature 

shows 

fi rst followed by the fl ashing setpoint    

  

 temperature.

  

2.   While holding in on the TEMP button, press and release 

  

 the 

SET button.  Now the setpoint temperature blinks at a 

 

 

 

faster rate.  Now release the TEMP button. 

  

3.   Press the UP and DOWN buttons to change the setpoint 

  

 temperature.

 

 

4.  Once the desired setpoint temperature (preprogrammed 

 

 

 

maximum temperature) is reached, press the SET button to 

 

 

 

return to normal operation mode and the setpoint is saved.  

 

 

 

Press and hold the SET button while using the UP and DO

 

 

buttons to set the desired time.  When the SET button is re

 

 

leased, the time is saved.

1.  With POWER switch off, press and hold both the UP and  

 

  

 DOWN buttons, and then turn the POWER switch on until “SP”   

 

 

 

shows on the display.  Release the UP and DOWN buttons, and    

 

 

 

“

o

F” or “

o

C” shows on the display.

 

 

2.  Press the UP or DOWN buttons to toggle from “

o

F” to “

o

C”,  

 

  

 or 

“

o

C” (Celsius) to “

o

F” (Fahrenheit).

306