Electrolux EED21600X User Manual

 

 

15 

 

Check that the input voltage indicated on the 
characteristics plate is the same as the voltage of 
the power outlet you are going to use. 

Open the drawer and take out all the 
accessories and remove the packing material. 

Attention! The front surface of the crockery 
heater may be wrapped in a protective film. 
Before using the crockery warmer for the first 
time, remove this film carefully. 

Make sure that the crockery warmer is not 
damaged in any way. Check that the drawer 
opens and closes correctly. If you find any 
damage, contact the Technical Assistance 
Service. 

The crockery warmer should only be built-in in 
combination with those appliances indicated by 
the manufacturer. If it is fitted in combination 
with other appliances, the guarantee is no 
longer valid since it is impossible to guarantee 
that the crockery warmer will work correctly. 

To build-in the crockery warmer in combination 
with another appliance there must be a fixed, 
interim shelf in the housing unit to support the 
weight of both appliances. 

The appliance to be combined with the crockery 
warmer will be placed directly on the latter without 
any need to have a separating shelf. 

To build-in the appliance which is combined with 
the crockery warmer, follow the instructions set 
out in the respective instructions and fitting 
booklet.  

 

The relevant installation dimensions are indicated 
in mm in the diagrams shown at the end of this 
booklet. Proceed as follows: 

1. Place the crockery warmer on the shelf and 

slide it towards the interior of the niche in 
such a way that it is centred and completely 
lined up with the front of the unit. 

2. Check that the crockery warmer’s frame is 

properly levelled and is sitting evenly on the 
shelf. 

3. 

Open the drawer and fix the crockery 
warmer to the sides of the unit using the two 
screws provided.