Panasonic Digital Camcorder NV-GS330 NV-GS330EG-S User Manual
Product codes
NV-GS330EG-S
Before using
13
VQT1L41
ª
Recharging the built-in lithium battery
≥If [
0] or [--] is appears when the camera is
turned on, then the built-in lithium battery has
run down. Use the steps below to charge the
battery. When turn on the power for the first time
after charging, [SET DATE AND TIME] will
appear. Select [YES] and set the date and time.
Connect the AC adaptor to the camera or attach
the battery to the camera, and the built-in lithium
battery will be recharged. Leave the camera as
is for approx. 24 hours, and the battery will drive
the date and time for approx. 6 months. (Even if
the [OFF/ON] switch is set to [OFF], the battery
is still being recharged.)
run down. Use the steps below to charge the
battery. When turn on the power for the first time
after charging, [SET DATE AND TIME] will
appear. Select [YES] and set the date and time.
Connect the AC adaptor to the camera or attach
the battery to the camera, and the built-in lithium
battery will be recharged. Leave the camera as
is for approx. 24 hours, and the battery will drive
the date and time for approx. 6 months. (Even if
the [OFF/ON] switch is set to [OFF], the battery
is still being recharged.)
Using the LCD monitor
You can record the image while viewing it on the
opened LCD monitor.
opened LCD monitor.
1
Put a finger on the LCD monitor open part
and pull the LCD monitor out in the
direction of the arrow.
and pull the LCD monitor out in the
direction of the arrow.
≥It can open up to 90o.
2
Adjust the angle of the LCD monitor
according to your preference.
according to your preference.
≥It can rotate up to 180o 1 towards the lens or
90
o 2 towards the viewfinder.
≥The brightness and colour level of the LCD
monitor can be adjusted from the menu.
≥If it is forcibly opened or rotated, the camera
may be damaged or fail.
≥If the LCD monitor is rotated by 180o towards
the lens and the viewfinder is extended (when
recording yourself), the LCD monitor and the
viewfinder simultaneously light.
recording yourself), the LCD monitor and the
viewfinder simultaneously light.
Using the viewfinder
ª
Extending the viewfinder
1
Pull out the viewfinder and extend it by
pinching the extension knob.
pinching the extension knob.
≥The viewfinder will be activated. (If the LCD
monitor is opened, the viewfinder will be
deactivated.)
deactivated.)
ª
Adjusting the field of view
1
Adjust the focus by sliding the eyepiece
corrector knob.
corrector knob.
≥You can adjust the brightness of the viewfinder
from the menu.
1 180o
2 90o
12:30:45
12:30:45
12:30:45
1. 1. 2008
1. 1. 2008
1. 1. 2008
12:30:45
1. 1. 2008
1. 1. 2008
VQT1L41_EP_ENG.book 13 ページ ２００７年１１月２７日 火曜日 午後６時１３分