Panasonic Digital Camcorder NV-GS330 NV-GS330EG-S User Manual

Menu

VQT1L41

ª

This switches between date and time indications.
≥The movie camera automatically records the 

date and time of picture taking on the tape/card.

≥You can also show or change the date/time 

indication by repeatedly pressing the 
[DATE/TIME] button on the remote control.

ª

Switches the audio (PCM audio) recording 
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. 

(The original audio signals can be kept 
after the other audio signals are dubbed.) 

[16bit]: Records audio in “16 bit 48 kHz 2 tracks”. 

Audio can be recorded in higher quality. 
(If audio signals are dubbed, then the 
original audio signals will be erased.) 

ª

Set to [ON] and the display mode can be switched 
to all functions. Set to [OFF] and it can be 
switched to minimum display.

ª

Set to [ON] and confirmation/alarm beeps are 
issued as follows.
1 Beep
≥When you start recording
≥When you turn on the power
≥

When the unit goes from quick start standby 
mode to recording pause

2 Beeps
≥When you pause recording
≥When you turn off the power
≥When the unit goes into quick start standby mode
2 Beeps for 4 times
≥When a cassette with its erasure prevention tab 

set to [SAVE] is inserted, condensation occurs 
(

), and at other times. Check the sentence 

displayed on the screen. (

)

ª

[OFF]:

When about 5 minutes passed 
without any operation, the standby 
mode automatically will be set. In 
the standby mode, [

;] blinks and it 

takes time more than usual to start 
recording after you press the 
recording start/stop button.

[5 MINUTES]:When about 5 minutes passed 

without any operation, the movie 
camera automatically turns off to 
protect the tape or to prevent the 
battery from running down. When 
you use the movie camera, turn it 
on again.

≥In the following cases, the power may not turn 

off even when set [POWER SAVE] >> 
[5 MINUTES].

≥When connecting to the AC outlet

(When using the AC adaptor)

≥When connecting the USB cable or the DV 

cable to a personal computer or other 
equipment

≥When in PC Connection Mode

ª

Set to [ON] and the settings (shutter speed, iris/
gain values, and white balance settings (

), 

etc.) used during the recordings are displayed 
during playback.
≥If the [AUTO/MANUAL/FOCUS] switch was set 

to [AUTO] when recording, [AUTO] appears on 
the display.

≥When there is no data, [---] appears on the display. 
≥If data recorded on this unit is played back on 

other equipment (or a tape recorded on other 
equipment is played back on this unit), the 
settings information is sometimes not displayed 
normally.

ª

This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub 

sound) 

[L]:

Left channel sound (main sound) 

[R]:

Right channel sound (sub sound) 

VQT1L41_EP_ENG.book  66 ページ  ２００７年１１月２７日　火曜日　午後６時１３分