Moxa VPort 2110 VPORT 2110 Leaflet
Product codes
VPORT 2110
-
Industrial Video Server Solutions
VP
or
t 2
11
or
t 2
11
0
Features
4
In
du
str
ial
Vid
eo
S
er
ve
r
Digitizes analog video signals INSTANTLY
Remote access with built-in web server for viewing and
configuring
Auto-sensing 10/100 Mbps Ethernet port and modem dial-in
connection
Built-in advanced Video Motion Detection (VMD)
Supports PTZ (PAN/TILT/ZOOM) motorized camera control via
RS-232/RS-485 COM port
Equipped with 1 DI and 1 Relay (DO) for external sensor and alarm
Snapshot images can be sent via FTP or E-mail
MOXA SoftDVR™ Lite for viewing and recording bundled free
Introduction
MOXA VPort 2110 Video Server, equipped with 1-ch video
input, image digitizer, image compressor with Motion-JPEG
compression, and web server with 10/100 Mbps Ethernet/
Modem interface, can digitize analog video sources and
distribute digital images over a computer network, turning
your CCTV video surveillance system into a "Video-over-IP"
Network System INSTANTLY.
Integrated Network System Structure
System integrators can use VPort 2110 Video Server to
integrate various functions, such as camera management,
video storage, video recording and playback, VMD (Video
Motion Detection), video interaction with DI/DO devices, etc.,
over an IP-based network.
1-channel MJPEG Video Server for Remote Surveillance via TCP/IP Networks
2110
* MOXA VPort SDK supported with flexible interface and
sample codes for third-party developers.
(Contact a MOXA sales representative for more information
about this SDK.)
(Contact a MOXA sales representative for more information
about this SDK.)
Built-in Web Server for Video Management and Control
MOXA VPort 2110 has a built-in Web Server that allows
users to fully manage and control camera and video images.
In addition to viewing and camera/video settings, advanced
functions, such as VMD (Video Motion Detection), PTZ camera
control, and sequential viewing, are also provided by VPort
2110. Snapshot images taken by either VMD or sequential
mode can be obtained by email or FTP to inform users of the
status of events.
Automatic Video Surveillance System via Interaction with I/O Sensors and Alarms
MOXA VPort 2110 Video Server is equipped with 1 Digital Input
and 1 Relay Output (DO) to connect with sensors and alarms.
By using system software (such as MOXA SoftDVR™ Pro
and 1 Relay Output (DO) to connect with sensors and alarms.
By using system software (such as MOXA SoftDVR™ Pro
IP Surveillance Software) or Script Command programming,
users can construct an automatic video surveillance system by
setting the interaction between cameras and DI/DO devices.
users can construct an automatic video surveillance system by
setting the interaction between cameras and DI/DO devices.
Specifications
Technology
Video Input (BNC): 1
NTSC/PAL: Auto-sensing or Manual
NTSC/PAL: Auto-sensing or Manual
Network
Protocols: TCP, HTTP, SMTP, FTP, Telnet, NTP, DNS, and DHCP
Modem: PPP (Dial-in, direct cable connection)
Ethernet: Auto sensing 10/100 Mbps
Modem: PPP (Dial-in, direct cable connection)
Ethernet: Auto sensing 10/100 Mbps
Video
Video Compression: JPEG, MJPEG
Video Resolution:
NTSC: Up to 30 frames at 176 × 112
Up to 30 frames at 352 × 240
Video Resolution:
NTSC: Up to 30 frames at 176 × 112
Up to 30 frames at 352 × 240
Up to 10 frames at 704 × 480
PAL: Up to 25 frames at 176 × 144
Up to 25 frames at 352 × 288
Up to 8 frames at 704 × 576