Sunbeam SR6565 User Manual

Page of 12
3
Sunbeam’s Safety Precautions
  Sunbeam is very safety conscious when  
designing and manufacturing consumer 
products, but it is essential that the product user 
also exercise care when using an electrical 
appliance. Listed below are precautions which 
are essential for the safe use of an electrical 
appliance:
•  Read carefully and save all the instructions
provided with an appliance.
•  Always turn the power off at the power outlet
before you insert or remove a plug. Remove  
by grasping the plug - do not pull on the cord.
•  Turn the power off and remove the plug
when the appliance is not in use and before 
cleaning.
•  Do not use your appliance with an extension
cord unless this cord has been checked  
and tested by a qualified technician or  
service person.
•  Always use your appliance from a power  
outlet of the voltage (A.C. only) marked  
on the appliance.
•  This appliance is not intended for use by
persons (including children) with reduced 
physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they
have been given supervision or instruction 
concerning use of the appliance by a person 
responsible for their safety. 
•  Children should be supervised to ensure that
they do not play with the appliance.
•  The temperature of accessible surfaces may be
high when the appliance is operating.
•  Never leave an appliance unattended while  
in use.
•  Do not use an appliance for any purpose  
other than its intended use.
•  Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven. 
•  Do not place on top of any other appliance.
•  Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch 
any hot surface.
•  Do not operate any electrical appliance with
a damaged cord or after the appliance has 
been damaged in any manner. If damage is 
suspected, return the appliance to the nearest 
Sunbeam Appointed Service Centre  
for examination, repair or adjustment.
•  For additional protection, Sunbeam
recommend the use of a residual current 
device (RCD) with a tripping current not
exceeding 30mA in the electrical circuit
supplying power to your appliances.
•  Do not immerse the appliance in water  
or any other liquid unless recommended.
• Appliances are not intended to be operated  
by means of an external timer or separate
remote control system.
• This appliance is intended to be used in
household and similar applications such 
as: staff kitchen areas in shops, offices and 
other working environments; farm houses; by 
clients in hotels, motels and other residential 
type environments; bed and breakfast type 
environments.
 SAFETY PRECAUTIONS FOR YOUR IRON
•  Do not leave a hot iron within reach of
children. If they come into contact with a 
hot iron it could lead to serious burns.
•  Iron only on an ironing board.
•  An iron takes approximately 30 minutes to
cool down. Allow the iron to cool completely 
before storing.
•  Do not wind the cord around the soleplate
while the iron is still hot.
•  Do not leave the iron unattended while it is
plugged into the power outlet.
•  Always unplug the iron from the power outlet
before filling or emptying the water tank.
•  The iron must be used and rested on a stable
surface.
•  The iron is not to be used if it has been
dropped, if there are visible signs of  
damage or if it is leaking.
  If you have any concerns regarding the performance and use of your appliance,  
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. 
  Ensure the above safety precautions are understood.