Philips TS2757C1 User Manual

• Check the TV power cord.  Unplug the TV, wait 10 seconds, then reinsert plug into 

outlet and push POWER button again.

• Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip.

• Check antenna connections.  Are they properly secured to the TV's ANT/CABLE plug?
• Check the TUNER control for CABLE or ANTENNA setting.
• Check Audio/Video Input jack connections if using a VCR or other external device.

• Check batteries.  Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries

if necessary. 

• Clean the remote and the remote sensor window on the TV.
• Check the TV power cord.  Unplug the TV, wait 10 seconds, then reinsert plug into 

outlet and push POWER button again. Be sure fuse is not blown on AC Power strip if 
one is being used.

• Check to be sure TV outlet is not on a wall switch.

• Check the VOLUME buttons.
• Check the MUTE button on the remote control.
• Check Audio/Video Input jack connections if using a VCR or other external device.

• Repeat channel selection.
• Add desired channel numbers (CHANNEL control) into TV memory.
• Check to be sure the TUNER control is set to the CABLE.

Cleaning and Care

• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.
• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using 

anything abrasive).  Wipe the front screen with a clean cloth dampened with water.  Use even, easy, vertical strokes when 
cleaning.

• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water.  Use a clean 

dry cloth to dry the wiped surfaces.

• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring 

of the cabinet finish.

CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage.  When your TV is continuously used with such a source
the pattern of the non-moving portion of the game (CDI, etc.) could leave an image
permanently on the picture tube.  When not in use, turn the video source OFF.
Regularly alternate the use of such video sources with normal TV viewing.