KitchenAid KUIO15NNLS User Manual

Before using, remove tape and glue from your ice maker. This 
includes the tape holding the door closed. Remove the accessory 
bag from the ice storage bin.

The ice maker is covered with a protective film. Completely 
remove the film before installing the ice maker.

■

To remove any remaining tape or glue, rub the area briskly 
with your thumb. Tape or glue residue can also be easily 
removed by rubbing a small amount of liquid dish soap over 
the adhesive with your fingers. Wipe with warm water 
and dry.

■

Do not use sharp instruments, rubbing alcohol, flammable 
fluids, or abrasive cleaners to remove tape or glue. These 
products can damage the surface of your ice maker. 

After you remove all of the packaging materials, clean the inside 
of your ice maker before using it. See the cleaning instructions in 
the “Ice Maker Care” section.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

: 

■

Plug into a grounded 3 prong outlet.

■

Do not remove ground prong.

■

Do not use an adapter.

■

Do not use an extension cord.

■

Disconnect power before cleaning.

■

Disconnect power before servicing.

■

Replace all parts and panels before operating.

■

Use two or more people to move and install ice maker.