Beko CTB 6407 User Manual

 

 

 

 

 

 

When installing the ducted version, connect the hood to 
the chimney using either a flexible or rigid pipe ø120 
mm, the choice of which is left to the installer. 
 
•  Fix the pipe in position using sufficient pipe clamps 

(not supplied). 

•  Remove any activated charcoal filters. 

 

 

•  Cut a hole ø 125 mm in any shelf that may be posi-

tioned over the hood. 

•  Connect the flange to the outlet on the shelf over the 

hood using a flexible or rigid pipe ø120 mm. 

•  Fix the pipe in position using sufficient pipe clamps 

(not supplied). 

•  Fix the directional grille 8 on the recirculation air 

outlet using the 2 screws 12e (2,9 x 9,5) provided. 

•  Ensure that the activated charcoal filters have been 

inserted. 

 

9

125

9

125

 

•  Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 

mm. 

•  When opening the sliding carriage for the first time after installing the hood, pull it out 

briskly until it clicks.