Kramer Electronics t User Manual
Overview
3
Table 1: Using the RK-1UTB/T
Mounting Kramer products
For example:
on the RK-1UTB
• One VP-100A unit
• Two 104B units
• One 104B unit
• One PS-1DVI unit
• One PT-1PS unit
• One PS-1DVI unit
• One PT-1PS unit
• Four PS-1DVI units
The RK-1UTB/T does not have to be entirely full with mounted units. You
can use the optional blank panels defined in
can use the optional blank panels defined in
Table 2: RK-1UTB/T Blank Panels – Part Numbers
Blank Panel Description
Part Number
PNL-BLANK/1/2U-19"
60-900013
PNL-BLANK/1/4U-19"
60-900014
PNL-BLANK/1/8U-19"
60-900015
3.1 Recommendations for Best Performance
We recommend that you:
• Have a Philips screwdriver available
• Disconnect the mains voltage and all cables connected to each machine that
• Have a Philips screwdriver available
• Disconnect the mains voltage and all cables connected to each machine that
is being mounted in the rack adapter before proceeding with the installation
• Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
levels (often associated with low quality cables)
• Avoid interference from neighboring electrical appliances and position
your rack adapter on the rack away from moisture, excessive sunlight and
dust
dust
1 Each product is measured in inches
2 Supplied with the unit