Philips V200 User Manual

Page of 328
REF 1057983 A
Respironics V200 Ventilator Operator’s Manual
10-1
Chapter 10. Care and Maintenance
General Information
Procedures for ventilator cleaning, sterilizing, and periodic maintenance must 
be performed to ensure consistent ventilator operation. Institutional policies 
may also provide guidelines, procedures, and schedules for cleaning and 
sterilizing equipment before, during and after patient use.
In addition, recommended methods and time frames for performing all 
necessary care and maintenance procedures for the ventilator are presented in 
this section.
Respironics recognizes that cleaning, sterilization, sanitation and disinfecting 
practices vary widely among health care institutions. It is not possible for 
Respironics to specify or require specific practices that will meet all needs, or 
to be responsible for the effectiveness of cleaning, sterilization, and other 
practices carried out in the patient care setting.
General procedures for cleaning and sterilizing the ventilator are described in 
the following sections. Some ventilator parts must be disassembled before 
cleaning and sterilizing. (Refer to “Removing and Replacing Internal Air 
Source Inlet Filter” on page 10-10.)
Cleaning
When cleaning parts, avoid the use of hard brushes or other instruments likely 
to cause surface damage.
CAUTION:
CAUTION: