Viking DIPR101R User Manual

2

AIR
VENT

COUNTER
TOP

BLOWER

BOX

CHIMNEY TOP

COOK TOP

GEAR

MOTOR

COVER

120 VAC 
GROUNDED 
OUTLET

This downdraft blower system is 

designed to be used to exhaust 

airborne contaminants when 

cooking with a variety of gas 

or electric cooktops. It can be 

mounted in island, peninsula, 

or conventional wall locations.
This unit can be easily installed 

following these basic steps:
•  Cut out the countertop 

opening.

•  Mount the unit in the cabi-

net.

•  Install the Model VIDV500 

Interior Blower

•  Connect the ductwork and 

electrical.

•  Install the cooktop.
note: the high level of air flow 

of this appliance may effect the 

gas flame on some types of gas 

cooktops. This is NORMAL and 

will cause no harm, but can be 

corrected by lowering the speed 

of the blower.

note: the high level of air flow of this appliance may effect the 

gas flame on some types of gas cooktops. This is NORMAL and 

will cause no harm, but can be corrected by lowering the speed 

of the blower.

120 VAC 
GROUNDED 
OUTLET

AIR
VENT

GEARMOTOR
COVER

This downdraft blower system 

is designed to be used to ex-

haust airborne contaminants 

when cooking with a variety 

of gas or electric cooktops. 

It can be mounted in island, 

peninsula, or conventional wall 

locations.
This unit can be easily installed 

following these basic steps:
•  Cut out the countertop 

opening.

•  Mount the unit in the 

cabinet.

•  Install 10" round dis-

charge plate

•  Install Model VEDV900 or 

VEDV1200 

 External Blower

•  Connect the ductwork 

and electrical.

•  Install the cooktop.

COOK TOP

COUNTER TOP

CHIMNEY TOP

10" ROUND
DISCHARGE
PLATE

10" ROUND DUCTWORK

1.  Refer to the cooktop installation instructions for dimensions 

of cooktop, countertop cut-out, and cabinet requirements. 

The Model RDIPR101RSS will fit in most 30" wide cabinets, 

the Model RDIPR161RSS will fit in most 36" wide cabinets, 

and the Model RDIPR151RSS will fit most 45" wide cabinets. 

However, it is recommended that oversized cabinets be used 

for easier installation.

2.  Cooktop depth can vary greatly from one to another. This may 

cause the fit of these two appliances to be rather tight.

Pay special attention to the areas of potential interference high-

lighted above. A countertop with (A) a raised lip and/or (B) a 

backsplash may not allow enough flat countertop for a proper 

installation. Note that 2" of flat countertop is required behind 

cooktop and that 1-3/4" is necessary between the back edge of 

the cooktop and the inside of cabinet back.

3-1/4" X 10"
DUCT CONNECTOR