Tektronix AWG710B User Manual
AWG710&AWG710B Arbitrary Waveform Generator User Manual
G-1
Appendix G: Sequence File Text Format
The sequence file saved by the sequence editor is an ASCII text file having the
format described below. You can create a sequence file on a PC or other computer
with an ASCII text editor.
format described below. You can create a sequence file on a PC or other computer
with an ASCII text editor.
MAGIC 3002A
LINES <number>
<line description>
<line description>
...
<line description>
TABLE_JUMP 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
LOGIC_JUMP -1,-1,-1,-1
JUMP_MODE LOGIC
JUMP_TIMING ASYNC
STROBE 0
LINES <number>
<line description>
<line description>
...
<line description>
TABLE_JUMP 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
LOGIC_JUMP -1,-1,-1,-1
JUMP_MODE LOGIC
JUMP_TIMING ASYNC
STROBE 0
Header
The header line MAGIC 3002A lets the instrument recognize a text file as the
sequence. This number must be added to the first line.
sequence. This number must be added to the first line.
Line Descriptions
The LINES provides the information that the sequence is composed of a number of
lines. From the third line to the line specified by <number> +2 are the sequence
lines you should edit in the in the sequence editor.
lines. From the third line to the line specified by <number> +2 are the sequence
lines you should edit in the in the sequence editor.
The <line description> is composed of 6 fields delimited by comma (,):
<F1>, <F2>, <F3>, <F4>, <F5>, <F6>, <F7>
CH1 and CH2. The <F1> is a waveform file name for the CH1 and <F2> for the
CH2. The waveform file name must be parenthesized with double–quotation.
CH2. The waveform file name must be parenthesized with double–quotation.
<F1>::=
<F2>::="<waveform file name>" | "<pattern file name>" |
"<sequence file name>"
<F2>::="<waveform file name>" | "<pattern file name>" |
"<sequence file name>"