Whirlpool W10400322F Manual

The range hood is designed to remove smoke, cooking vapors 
and odors from the cooktop area. For best results, start the hood 
before cooking and allow it to operate several minutes after the 
cooking is complete to clear all smoke and odors from the 
kitchen.

The hood controls are located on the front panel of the range 
hood.

Turn the light switch to the right 1 position for Low (night light).

Turn the light switch to the right 2 positions for High.

The fan is variable speed. Rotate the fan switch to the right to 
turn the fan to the ON position. Continue to rotate the switch to 
the desired fan speed.

To turn the fan OFF, rotate the fan speed switch to the left to the 
OFF position.

IMPORTANT: Clean the hood and grease filters frequently 
according to the following instructions. Replace grease filter 
before operating hood.

IMPORTANT: Do not use soap-filled scouring pads, abrasive 
cleaners, Cooktop Polishing Creme, steel wool, gritty washcloths 
or paper towels.

To avoid damage to the stainless steel, do not use cleaners that 
contain chlorine.

■

Rub in direction of grain to avoid scratching or damaging the 
surface.

■

For stainless steal models, Stainless Steel Cleaner and Polish 
Part Number 31462A (not included): See “Assistance or 
Service” section to order.

■

Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.

■

Glass cleaner to remove fingerprints.

1. Remove screw from the grease filter retainer.

2. Turn the grease filter retainer to release filter. 

3. Wash metal filters as needed in dishwasher or hot detergent 

solution.

4. Reinstall the filter by placing the back edge in the channel at 

rear of hood. Push filter into place, turn the filter retainer to 
secure filter to range hood.

5. Replace screw in the grease filter retainer.

A

C

B

A

B

A