Zanussi ZHC72X User Manual

 

 

5

 

 
Before carrying out any     
maintenance or cleaning  
isolate the cooker hood from 
the mains supply. 
 
The cooker hood must be kept 
 clean, a build up of grease or fat 
 can be a fire hazard. 
 

If you have the cooker hood operating in 
the re-circulation mode, it is necessary to 
change the charcoal filters (N) regularly 
according to use.  They should be 
changed at least twice a year. 
To remove the charcoal filters: 
- 

take off the anti-grease grilles as 
described in the installation section. 

- 

lift the two metallic stops (P). 

- 

remove the charcoal filter. 

 
The 2 anti-grease filters are easily 
removed from the grille by following the 
instructions and lifting the two metallic 
stops (P).  If you are using the hood in the 
re-circulation mode, you will need to 
remove the charcoal filter to access the 
anti-grease filters. 
 

 

 

WARNING:  There is a third metallic filter 
(not visible) which can be accessed 
through opening R. 
 
 

 

 
 

Any fat deposits should be removed 
regularly, at least every two months.  
Avoid using abrasive or corrosive cleaning 
products. 
 
To clean the outside of the cooker hood, 
use a cloth dipped in lukewarm water to 
which a small amount of washing up liquid 
has been added. 
 
To clean the steel, brass or copper parts 
on the outside of the appliance, use a 
proprietary cleaner and follow the 
manufacturer’s instructions. 
 
The inside of the appliance should be 
cleaned with a soft cloth or brush dipped in 
warm soapy water.