Honeywell VNT5200E1000 User Manual

Control Panel

The control panel has a 3-position selector switch
and “

+

” and “

–

” buttons for speed control. The

color of the LED indicator indicates the current
function of the selector switch.
•  GREEN LED = Mode Control (normal operating

mode)

•  YELLOW LED = Balancing Control

Speed Control used as a Mode Control

When the LED indicator is green, the selector switch functions as a Mode Selector. The selections are:
•  INTER (Intermittent): When the selector switch is in the intermittent position the unit will run only when

there is a call for ventilation by any external control. At that time the unit will run on high speed until the
condition is satisfied.

•  CONT (Continuous): When the selector switch is in the continuous position the unit will run continuously

on low speed except when there is a call for override by any control.

•  OFF: When the selector switch is in the off position the unit will not operate even when there’s a call for

ventilation by an external control.

) buttons: Used to adjust the continous speed setting.

Speed Control used as a Balancing Control

In balancing mode the LED indicator is yellow, and the selector switch functions as a Balancing Control
to set the high speed of the motors for balancing purposes (Fresh air, Exhaust air, and Both motors). The
selections are:.
•  INTER: Selects the exhaust air motor.
•  CONT: Selects both exhaust and fresh air motors.
•  OFF: Selects the fresh air motor.
NOTE:  Continuous low speed is 50% of the set high speed.
NOTE:  See Balancing Steps on page 25.

Speed Control used as a Motor Control

•  + Button: Increase the speed of the selected motor.
•  – Button: Decrease the speed of the selected motor.
NOTE:  See Balancing Steps on page 25.

ERV/HRV Ventilation Systems 69-2480EF—01

24

LED

3-POSITION

SELECTOR SWITCH

SPEED CONTROL

BUTTONS (+ AND -)

M32371