Buffalo Technology TSXE80TLR5 User Manual
TeraStation User Manual
142
Factory Defaults
The following settings are factory defaults for the TeraStation.
Username
admin
Password
password
Shared Folders
“share” (for both Windows and Macintosh computers). The recycle bin is set to
[Enabled] on “share” by default.
[Enabled] on “share” by default.
DHCP Client
Normally, the TeraStation will get its IP address automatically from a DHCP server on
the network. If no DHCP server is available, then an IP address will be assigned as
follows:
IP Address: 169.254.xxx.xxx (xxx is assigned randomly when booting the TeraStation).
Subnet Mask: 255.255.0.0
the network. If no DHCP server is available, then an IP address will be assigned as
follows:
IP Address: 169.254.xxx.xxx (xxx is assigned randomly when booting the TeraStation).
Subnet Mask: 255.255.0.0
Registered Group
The TeraStation has 3 default groups: “hdusers”, “admin” and “guest”.
You cannot edit or delete them.
You cannot edit or delete them.
Microsoft Network Group
Setting
Setting
WORKGROUP
Ethernet
Frame Size
1518 bytes
AFP
Enabled
FTP
Disabled
NTP
Automatic
PrintServer
Enabled
WebAccess
Disabled
Time Machine
Disabled
TeraSearch
Disabled
RAID Mode
RAID 5 mode for TS-XL, TS-XEL (4 hard drives)
RAID 5 mode for TS-RXL (4 hard drives)
RAID 1 mode for TS-WXL/R1
Normal mode for TS-WXL/1D
Note:
To restore factory defaults, refer to “Initialization” on page 70.
To restore factory defaults, refer to “Initialization” on page 70.