Buffalo Technology TSXE80TLR5 User Manual

TeraStation User Manual

63

Notes: 
•  Formatting deletes all data from a hard drive.  Be careful!  Back up any important data on a drive before formatting it.  It 

will take a several minutes to format a hard drive. 

 •  Shared folders cannot be accessed during formatting. 
 •  Do not turn off the power switch or disconnect power while formatting a hard drive.
 •  If the Power Mode Switch is set to AUTO, then the TeraStation will turn off when the format is finished.
 •  To erase all data on a disk, choose [System] - [Restore/Erase] instead of formatting. 

 The [Confirm Operation] screen will be displayed.  Type the displayed number into the [Confirmation Number] 

field within 60 seconds, then click [Apply].

Follow the instructions displayed on the screen.

Notes: 

•  The time needed to format a hard drive varies based on the hard drive’s size and format types (a few seconds to 

several minutes). 

 •  The Info LED on the front of the TeraStation will flash during formatting. The TeraStation’s shared folders cannot be 

accessed until the disk format is complete. 

 •  If the hard drive is an external USB drive, its partitions will be recreated. 

In the Web Admin interface, navigate to [System] - 

[Storage] - [Disks].

Select the drive to format.

Click [Format Disk].

Select [File System]

.

• If you check [Encryption], the drive will be encrypted 

with 128 bit AES.  It will be normally accessible in the 
TeraStation, but if removed, it will not be accessible from 
other devices.  If encryption is enabled, data recovery 
services will not be able to recover data from a damaged 
disk.  To unencrypt the drive, uncheck [Encryption] and 
format it again. 

• Refer to page 125 for more on format type.

Click [Format].