Aleratec 260203 User Manual

www.aleratec.com

9

c.  Click Install to complete the installation.

3.  Connect the 1:15 to your PC with the USB cable.
4.  Make sure the 1:15 is in USB mode.  Press the “USB” fastkey on the control 

panel on the front of the 1:15.  If the screensaver is on you may have to press 

the button twice.

5.  You will see the LCD screen display the “USB Connection” menu.  Below this 

title you will see an “On” or “Off” listed. This is the current status of the USB 

connection. To change the current status, use either the Up or Down arrow keys 

to select the mode you want. Then, press the ENT key to confirm the selection.  

You will be prompted to restart the system. For this guide make sure that the 

USB mode is enabled.
Note: While in USB mode, the duplicator cannot access the hard drive 
only the PC can.