Aleratec 260203 User Manual

www.aleratec.com

17

This process copies a Master Disc to several blank discs simultaneously. Due to 

the nature of simultaneous disc duplication, a good quality Master Disc and lower 

recording speeds maybe necessary to ensure high success and quality duplications 

rates.

1.  Turn on the duplicator. After the duplicator has booted up, you will see the 

following display:

2.  Make sure the Source Drive is set to the BD/DVD/CD source drive.

It is very important to make sure that your current Source Drive is the BD/DVD/

CD source drive in order to avoid unnecessary error messages. To check the 

Source Drive, do the following:

a.  Use UP or DOWN arrow buttons to navigate to the following screen, or 

press the “SOURCE” Fast Key:

b.  Press ENT to enter Select Source menu and you will see the following:

Make sure it is located at “Drive 1 Port 0.0”. If not, press the UP or 

DOWN navigation button to search for it. There will be drive model

information where XXXXXX is shown above.

c.  Press ENT to submit your selection.

3.  Go back to the “COPY” menu.

a.  Use UP or DOWN arrow button to navigate to the following screen:















