Aleratec 260203 User Manual
www.aleratec.com
58
Stand-Alone Tower Publisher SLS: Tutorials
Using AUTOCOPY - continued
Note: It is normal to see the progress indicator stay at 0-10%
and at 100% for approximately 30 seconds during CD duplication.
Additionally it is normal to see the progress indicator stay at
0-10% and at 100% for up to 1 minute during DVD duplication.
There is a delay caused by the initializing and finalizing stage of
disc duplication. Due to this delay, it is normal to see progress
indicators stay at 100% for up to several minutes before moving
on. Once the disc duplication is completed, successful copies will
be ejected and you will see the following display:
and at 100% for approximately 30 seconds during CD duplication.
Additionally it is normal to see the progress indicator stay at
0-10% and at 100% for up to 1 minute during DVD duplication.
There is a delay caused by the initializing and finalizing stage of
disc duplication. Due to this delay, it is normal to see progress
indicators stay at 100% for up to several minutes before moving
on. Once the disc duplication is completed, successful copies will
be ejected and you will see the following display:
Next, refill your blank Discs to continue making more copies. If you wish to
copy a new Master Disc, remove the old master and load the new Master Disc
prior to loading any new blank discs into the Writer Trays.
Note: Failed discs will not be ejected automatically. You will need to
manually eject these. Throw away any failed write-once discs.
Note: Failed discs will not be ejected automatically. You will need to
manually eject these. Throw away any failed write-once discs.
“PASS 7” indicates that you’ve just made 7 successful
copies.
“FAIL 0” indicates that you have no failure in this run.
“7” indicates that you’ve successfully copied 7 copies
so far.
PASS 7 FAIL 0 ( 7)
Waiting for Blanks
Waiting for Blanks
COPY
USB
PRINT
SOURCE
ESC
ENT