Gigabyte GA-7VAC User Manual

Page of 96
- 12 -
GA-7VA-C Motherboard
English
Step 2: Install memory modules
Total Memory Sizes With Unbuffered DDR DIMM
Devices used on DIMM
1 DIMMx64/x72
2 DIMMsx64/x72
3 DIMMsx64/x72
64 Mbit (2Mx8x4 banks)
128 MBytes
256 MBytes
384 MBytes
64 Mbit (1Mx16x4 banks)
64 MBytes
128 MBytes
192 MBytes
128 Mbit(4Mx8x4 banks)
256 MBytes
512 MBytes
768 MBytes
128 Mbit(2Mx16x4 banks)
128 MBytes
256 MBytes
384 MBytes
256 Mbit(8Mx8x4 banks)
512 MBytes
1 GBytes
1.5 GBytes
256 Mbit(4Mx16x4 banks)
256 MBytes
512 MBytes
768 MBytes
512 Mbit(16Mx8x4 banks)
1 GBytes
2 GBytes
3 GBytes
512 Mbit(8Mx16x4 banks)
512 MBytes
1 GBytes
1.5 GBytes
The motherboard has 3 dual inline memory module(DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot.
The DIMM module can only fit in one direction due to the notch. Memory size can vary between
sockets.
DDR
1. The DIMM slot has a notch, so the
DIMM memory module can only fit in one direction.
2. Insert the DIMM memory module verticallyinto the
DIMM slot. Then push it down.
3. Close the plastic clip at both edges of theDIMM slots
to lock the DIMM module.
M Reverse the installation steps when you wish to
remove the DIMM module.
When DIMM LED is ON, do not install/remove DIMM from socket.
Please note that the DIMM module can only fit in one direction due to the one notches.
Wrong orientation will cause improper installation. Please change the insert orientation.