Soyo SY-P4I875P User Manual

 

  
1.  Please read the users guide before proceeding with your 

2.  This motherboard does not support CPUs with a Vcore 

higher than 1.6 volts. Please make sure the CPU you are 

using 1.6 volts or is below. Check the CPU specification 

before you insert it in the CPU socket. 

3.  AGP cards running at 3.3v are not supported. Only AGP 

cards running at 1.5v (most 4x or 8x AGP cards) are 

supported on this motherboard. 

4.  Please make sure that your memory modules are inserted 

correctly. They can go in only one way, and should fit 

completely in the socket without sticking out. Failure to do 

so will damage your motherboard and memory module. 

5.  An ATX12V power supply (Power supply for Pentium 4 

system) is required for the system to operate normally. 

(Preferably 350 watts for minimal loading or 400 watts for 

fully loaded system). 

6.  If you have any problem getting your system to work, 

please follow the troubleshooting tips in your user manual. 

7.  On some motherboards, the actual chipset cooler may differ 

from the chipset cooler as shown on the picture or on the 

box. However, the chipset fan on the motherboard is of the 

same quality and will work just as well as the one shown in 

the picture. (The chipset cooler is as sufficient as the chipset 

fan based on a different design.) 

8.  For answers to Technical questions, please visit SOYO tech 

support link

 

at 

http://www.soyogroup.com/support

 and 

http://www.soyogroup.com/kb

.