Panasonic KX-HCM8 User Manual

Page of 118
Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 105
5.4
Troubleshooting
About Network Camera Setup
Problem
Cause and Remedy
When Setup 
CD-ROM 
cannot find 
Network 
Camera.
Reconnect the AC adaptor if installation is not completed within 
20 minutes.
Do not connect Network Camera over a broadband router. 
Setup program cannot detect Network Camera.
If IP address is not assigned to the PC, setup program cannot 
find Network Camera. Confirm that IP address is assigned to 
the PC in the way shown on page 23. IP address of the PC can 
be assigned on TCP/IP Properties window to access through 
the steps in the TCP/IP Properties Table on page 24
Confirm that the Network Configuration from setup program is 
enabled on Network window on page 50.
When you set up Network Camera in [Type 3], connect 
temporarily Network Camera in [Type 1][Type 2] or [Type 4].
Antivirus software on the PC may interfere with the setup 
program. Disable the firewall of the antivirus software only 
when setting up Network Camera.
When Setup 
program fails to 
save the 
network 
parameters.
Reconnect the AC adaptor if installation is not completed within 
20 minutes.
Network may have the trouble. Confirm the parameters and the 
connections of Network Camera through page 18—page 31.
Top Page does 
not appear in 
the Internet 
Connection.
Confirm that Default Gateway address is correct on Network 
window
 on page 50.
The broadband router needs Port Forwarding (IP Masquerade) 
feature. Refer to the broadband router's manual for details.
Packet Filtering of the broadband router may prohibit access 
from an external network. Refer to broadband router's manual 
for details.
Access Network Camera from the Internet with the global IP 
address of the broadband router and port number of Network 
Camera.
Some broadband routers reject the global IP address to access 
Network Camera on the same LAN. Access with the private IP 
address of Network Camera.