Panasonic KX-HCM8 User Manual
Operating Instructions
14
1.3
Camera Feature Locations
1.3.1
Front View
Power Indicator
Power Indicator can be controlled on Indicator Control window on page 79.
Power Indicator blinks in the following situations.
Power Indicator blinks in the following situations.
•
During the Update Firmware.
•
During initializing after pushing CLEAR SETTING button.
•
During getting the IP address from the DHCP server.
•
Because of the internal failure of Network Camera. Refer to page 107.
Fixed Focus Lens
Network Camera uses Fixed Focus Lens. Minimum distance between Network
Camera and object is 1 meter (40 inches).
Camera and object is 1 meter (40 inches).
Note
Do not touch the Fixed Focus Lens. Touching it may leave a fingerprint and can
cause the image to be out of focus. This can also remove the protective coating
from the Fixed Focus Lens.
cause the image to be out of focus. This can also remove the protective coating
from the Fixed Focus Lens.
Corresponding to the attachment lens (customer provided)
The Network Camera’s lens is threaded to accept optional diopter lens (customer
provided), similar to those used with camcorders. Panasonic does not offer any at
this time. If the lens you choose is slightly larger than 30.5 mm, adaptor rings can
be purchased from most photographic supply dealers. The adaptor should be
selected to convert 30.5 mm to the diameter of the lens you choose.
provided), similar to those used with camcorders. Panasonic does not offer any at
this time. If the lens you choose is slightly larger than 30.5 mm, adaptor rings can
be purchased from most photographic supply dealers. The adaptor should be
selected to convert 30.5 mm to the diameter of the lens you choose.
Power Indicator
(Refer to page 79 for the setup.)
(Refer to page 79 for the setup.)
Fixed Focus Lens
1 m (40 inches) – Infinity
1 m (40 inches) – Infinity
Attachment Lens (30.5 mm)
(customer provided)
Turn the attachment lens till it stops.
(customer provided)
Turn the attachment lens till it stops.