Sony CCp-8000 User Manual

  

 Chap

te

r 14 

Sn
aps

ho
ts

166

Snapshot Operations in the Flexi Pad Control Block

As an example, to save a snapshot on the M/E-1 bank, use the following 
procedure.

In the M/E-1 bank, make the settings for the state you want to save as a 
snapshot.

In the M/E-1 bank Flexi Pad control block, press the [SNAPSHOT] button.

This allocates the Flexi Pad control block to snapshot operations. The 
numeric display shows the last selected bank number and the register 
number last recalled on the bank.

Use any of the following methods to select the bank for saving the 
snapshot.
(On a simple type Flexi Pad control block, there are no banks, and this 
operation is not necessary.)

To select bank 0: Press the [BANK 0] button.
To select bank 1: Press the [BANK 1] button.
To select any bank from 0 to 9: Press the [BANK SEL] button, changing 

the memory recall section display as shown below; select a number 
from 0 to 9.

The selected bank number appears in the numeric display.
The buttons in the memory recall section change to show the names of the 
registers in the selected bank, together with the register status.
Using the Setup menu, it is possible to specify which to display, the 
register name or register number. 
Lit orange: Register containing a snapshot
Lit yellow: Last recalled register

7

8

9

4

5

6

1

2

3

0