Sony CCp-8000 User Manual

  

 Chapt

er

 16

 

Eng

inee

ring
 S
e

tu

p

232

Setup Relating to Operations From the Control Panel

Protect: In this mode, pressing a panel button cannot change the 
cross-point settings.

The button ON/OFF state is preserved in each of the “Normal” and 
“Protect” modes. For example, if the [XPT HOLD] buttons are “ON” in 
the Normal mode, and you switch to Protect mode, then if the [XPT 
HOLD] buttons were “OFF” in this mode the previous time, the [XPT 
HOLD] buttons go off, and if they were “ON” they light.

Use the following procedure.

In the Panel>Operation menu, press the [Sensitivity].

The Sensitivity menu appears.
The status area shows a list of the items with their settings.

Make the following settings as required.

Trackball and Z-ring sensitivity in normal mode: In the <Trackball 

Normal Mode> group, select [

×

1], [

×

2], or [

×

4].

Trackball and Z-ring sensitivity in fine mode: In the <Trackball Fine 

Mode> group, select [

1

/

2

], [

1

/

4

], or [

1

/

8

].

Joystick sensitivity in normal mode: In the <Joystick Normal Mode> 

group, select [

×

1], [

×

2], or [

×

4].

Joystick sensitivity in fine mode: In the <Joystick Fine Mode> group, 

select [

1

/

2

], [

1

/

4

], or [

1

/

8

].

Touch sensitivity for recalling menus by double-clicking buttons: In 

the <Double Click> group, select [Fast], [Normal], or [Slow].

In the <Main Split Fader> group of the Panel>Operation menu, select 
[Left] or [Right].

To make settings relating to the screen saver, etc., use the Panel>Maintenance 
menu.

In the Engineering Setup menu, select VF2 ‘Panel’ and HF7 ‘Maintenance.’