Sony CCp-8000 User Manual
261
Setup Relating to DME
Ch
apt
apt
er 16
E
ngin
eering Se
tup
Setting an illegal color limit for matte signals
To enable the illegal color limiter for the signals generated by the DME internal
matte generator, press [Matte Illeg Col Limit] for DME1 in the DME>Input
menu, turning it on.
matte generator, press [Matte Illeg Col Limit] for DME1 in the DME>Input
menu, turning it on.
Interfacing With External Devices (Device Interface
Menu)
Menu)
To carry out setup relating to DME connections with external devices, display
the DME>Device Interface menu.
the DME>Device Interface menu.
To display the Device Interface menu
In the Engineering Setup menu, select VF4 ‘DME’ and HF4 ‘Device
Interface.’
In the following, the settings for DME1 are explained. (It is not necessary to
make settings for DME2.)
Interface.’
In the following, the settings for DME1 are explained. (It is not necessary to
make settings for DME2.)
Setting the editor protocol
In the <DME1 Editor Protocol> group of the DME>Device Interface menu,
press the following buttons to make the setting.
DME: Control by DME protocol through the editor port.
VTR: Control by VTR protocol through the editor port.
press the following buttons to make the setting.
DME: Control by DME protocol through the editor port.
VTR: Control by VTR protocol through the editor port.
Making DME GPI input settings
Use the following procedure.
1
In the DME>Device Interface menu, press [DME1 GPI Input].
The DME1 GPI Input menu appears.
2
Using any of the following methods, select the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
Knob
Parameter
Adjustment
Setting values
1
Port
Input port selection
1 to 8
2
No
Selection of number for action to
be assigned
be assigned
1 to 8