Sony CCp-8000 User Manual
Chapt
er
16
Eng
inee
ring
S
e
S
e
tu
p
266
Setup Relating to DCU
4
To confirm the assignment in step
3
, press [GPI Input Set].
This assigns the GPI input, and this is reflected in the status area.
Releasing the assignment of a GPI input port
Use the following procedure.
1
In the DCU>Input Config menu, select what the setting applies to (DCU1
or DCU2) from the <DCU Select> group.
or DCU2) from the <DCU Select> group.
2
In the <Parallel Input Assign> group, if [GPI Input] is on, press it to turn
it off.
it off.
3
Turn the knobs to adjust the following parameters.
4
In the <Parallel Input Assign> group, press [No Assign].
GPI Input Setting (GPI Input Assign Menu)
To set the trigger type and so on for each GPI input, display the DCU>GPI
Input Assign menu.
Input Assign menu.
To display the GPI Input Assign menu
In Engineering Setup, select VF5 ‘DCU’ and HF2 ‘GPI Input Assign.’
The GPI input port setting status appears in the status area.
The GPI input port setting status appears in the status area.
Making DCU GPI input settings
Use the following procedure.
1
In the DCU>GPI Input Assign menu, using any of the following methods
select what the setting applies to.
select what the setting applies to.
• Press directly on the list appearing in the status area.
Knob
Parameter
Adjustment
Setting values
1
Parallel Input
Input port
1 to 102
3
GPI Input
GPI input
1 to 50
Knob
Parameter
Adjustment
Setting values
1
From No
First port number
1 to To No
2
To No
Last port number
From No to 102