Sony 2 User Manual

   Chapt

er

 12
 

Ex
te

rn

al De

v

ic

e

s

100

Control of VTRs and Disk Recorders

• To set the stop point, press [SET] in the <Stop TC> group.
• To set the start delay time point, press [SET] in the <Delay> group.

A timecode window appears.

Set the timecode value for the start point, stop point, or start delay time.

You can enter a start delay time in the range that depends on the signal 
format as follows:

00:00 to 59:nn,
where nn = (number of frames per second) – 1.

Press [Enter].

The set start point, stop point, or start delay time is reflected in the status 
area.

In the Device menu, use the following procedure.

In the Device menu, press VF3 ‘VTR’ and HF1 ‘Cueup & Play.’

Using any of the following methods, select the device for which you want 
to clear the settings.

• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.

Carry out any of the following operations as required.

• To clear the start point, in the <Start TC> group press [Clear].
• To clear the stop point, in the <Stop TC> group press [Clear].
• To clear the start delay time, in the <Delay> group press [Clear].

This clears the setting of the start point, stop point, or start delay time.

1

Dev

Device number 

1 to 12