Sony 2 User Manual
29
DME Special Effect Operations
Cha
p
te
r 11
DME Op
er
at
ion
s
s
5
To soften the inside of the edges and the boundaries between adjacent
edges, turn on [Edge Soft], and adjust the following parameters.
edges, turn on [Edge Soft], and adjust the following parameters.
Defocus Settings
This effect defocuses the entire image.
For an illustrative figure and other information, see “DME Special Effects” in
Chapter 1 (Volume 1).
Chapter 1 (Volume 1).
Applying the Defocus effect
Use the following procedure.
1
In the DME menu, select VF2 ‘Video Modify’ and HF1 ‘Defocus/Blur.’
The Defocus/Blur menu appears.
2
Press [Defocus], turning it on.
The Defocus effect is enabled. You can adjust the defocusing of video and
key signals with the knobs.
key signals with the knobs.
3
In the <Defocus> group, select the signal to which to apply the defocus
effect.
effect.
Video/Key: Video signal and key signal
Video: Video signal only
Video: Video signal only
Knob
Parameter
Adjustment
Setting values
1
Inner Soft
Softness of the inside of edges
0.00 to 100.00
2
Bound Soft
Softness of the edge boundaries
0.00 to 100.00
Bound Soft
Inner Soft