Maxtor STM3160215AS User Manual
24
DiamondMax 21 Serial ATA Product Manual, Rev. C
STM3250824AS and STM3250310AS
These drives comply with the performance levels specified in this document when subjected to a maximum
operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more
than two times per second.
operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more
than two times per second.
2.9.5.2
Nonoperating shock
STM3320620AS, STM3320820AS, STM3250824AS, STM3250820AS, STM3250310AS,
STM3160815AS, STM3160215AS, STM380815AS, STM380215AS and STM340215AS
The nonoperating shock level that the drive can experience without incurring physical damage or degradation
in performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse
of 2 msec duration.
in performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse
of 2 msec duration.
STM3500630AS
The nonoperating shock level that the drive can experience without incurring physical damage or degradation
in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse
of 2 msec duration.
in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse
of 2 msec duration.
2.9.6
Vibration
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the
drive mounting screws. Vibration may be applied in the X, Y or Z axis.
drive mounting screws. Vibration may be applied in the X, Y or Z axis.
2.9.6.1
Operating vibration
The maximum vibration levels that the drive may experience while meeting the performance standards speci-
fied in this document are specified below.
fied in this document are specified below.
2.9.6.2
Nonoperating vibration
The maximum nonoperating vibration levels that the drive may experience without incurring physical damage
or degradation in performance when subsequently put into operation are specified below.
or degradation in performance when subsequently put into operation are specified below.
5–22 Hz
0.25 Gs (Limited displacement)
22–350 Hz
0.50 Gs
350–500 Hz
0.25 Gs
5–22 Hz
0.25 Gs (limited displacement)
22–350 Hz
5.0 Gs
350–500 Hz
1.0 Gs