Hotpoint HM 3x AA User Manual

If the appliance does not work, before calling for Assistance (see 

Assistance), check for a solution from the following list.

• The plug has not been inserted into the electrical socket, or not 

far enough to make contact, or there is no power in the house.

•  The doors do not close properly or the seals are damaged.

•  The doors are opened too frequently.

•  The TEMPERATURE ADJUSTMENT knob is not in the correct 

position.

•  The refrigerator or the freezer have been over-filled.

•  The  atmospheric  temperature  of  the  area  surrounding  the 

appliance is lower than 14°C.

•  The TEMPERATURE ADJUSTMENT knob is not in the correct 

position.

•  The  food  is  in  contact  with  the  back  inside  wall  of  the 

refrigerator.

•  The refrigerator door is open.

•  The AIR system is only activated automatically when it becomes 

necessary to restore perfect operational conditions inside the 

refrigerator compartment.

•  The door is not closed properly or is continuously opened.

•  The outside ambient temperature is very high.

•  The thickness of the frost exceeds 2-3 mm (see Maintenance).

• The appliance has not been installed on a level surface (see 

Installation).

• The appliance has been installed between cabinets that vibrate 

and make noise.

• The internal refrigerant makes a slight noise even when the 

compressor is off. This is not a defect, it is normal.

•  These raised temperatures are necessary in order to avoid the 

formation of condensation on certain parts of the product.

• This shows the appliance is operating normally.

• The water discharge hole is blocked (see Maintenance).

19511505801

12/2013